DNZ Hunt Masters 2-Piece Scope Mount (2 Screws) - Howa 1500, Mossberg 100ATR, 4x4, Weatherby Vanguard, Remington 700, 721, 722, 725 - 1" Medium Black

ITEM NUMBER:

VW701M2

UPC:

879956007346

BRAND:

DNZ

MFG PRODUCT #:

701M2

SPECIFICATIONS

BRAND:

DNZ

CA PROP 65:

YES

MATERIAL:

ALUMINUM

RING & MOUNT FINISH:

BLACK

RING & MOUNT PIECES:

2-PIECE

RING & MOUNT RING HEIGHT:

MEDIUM

RING & MOUNT TUBE DIAMETER:

1"

RING & MOUNT TYPE:

RINGMOUNT

DESCRIPTION

This DNZ 2-Piece Scope Mount - Remington .700 is made from high-grade aluminum and weighs only about one-third of what a steel ring base combo does. Made to be tough and durable, this mount is easy to install and does not require any special tools.

This mount has 4 times the amount of threads as a conventional mount. This system takes away the need to pick a separate ring and base, which over time have a tendency to become loose.

Fits Howa 1500, Mossberg 100ATR, 4X4, Patriot, MVP, Weatherby Vanguard, Remington 700,721,722,725 (fits all action lengths): Base screws are 6-48 X 1/4? long. Ring screws are 6-40 X 5/8? long. Both use a 7/64 Allen wrench. Hole spacing dimensions on front mount is .86? and on back mount it is .60?. Both mounts are not the same part. Back mount is taller than front mount because receiver is lower on back end. Standard rings are .63? wide and Tactical rings are .80? wide. Standard rings have 2 screws per ring and Tactical rings have 4 screws per ring. Height of mounts from top of receiver to centerline of scope tube is – X low .86, low .98?, medium 1.10?, and High 1.23?.

Hunt Masters signature series two piece scope mounts
Fits long and short actions, some super short actions – left and right hand guns
Custom made to fit each type of firearm and align perfectly with your rifle’s receiver
Each ring and base is machined from a solid block of top-grade billet aluminum
Internal ring and base design allows for extra eye relief adjustment
Eliminates or reduces scope damage from tightening rings
Approximately 1/3 the weight of steel
Eliminates the need for windage screws that can work loose and cause problems
No moving parts between the firearm and the scope
Up to four times the threads of other mounts for absolute strength and security
Absorbs shock and withstands temperature extremes better than steel mounts at a fraction of the weight
Made in the USA

California Proposition 65 WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov