Product Finder

Home > Catalog > Lee Bullet Sizer Kit For Bullet Sizer & Punch

Lee Bullet Sizer Kit For Bullet Sizer & Punch

ITEM NUMBER:
LEE91532
UPC:
734307915322
BRAND:
Lee
MFG PRODUCT #:
91532
SPECIFICATIONS
BRAND:
LEE
CA PROP 65:
YES
CA PROP 65 CHEMICAL:
LEAD
CASTING BULLET TYPE:
N/A
CASTING ITEM TYPE:
CASTING ACCESSORIES
HANDLE:
N/A
MOULD MATERIAL:
N/A
NUMBER OF CAVITIES:
N/A
RELOADING CALIBER:
N/A
RELOADING DIAMETER:
N/A
DESCRIPTION

Fastest and easiest way to size cast bullets. Standard 7-8x14" threads fit any single stage reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are captured in the special container.

  • Special note: Intended for use on single stage presses only. The push through punch is used in place of a shell holder in the ram.
  • Lee does not make top punches for molds. With the use of this kit, a top punch is not necessary.
  • To crimp gas checks with the lube and size kit, first lubricate the bullets with liquid alox (sold separately), push a gas check on the base of the bullet and set the bullet on the punch. When the bullet is pushed through the sizing die, the bullet will be sized, and the gas check will be crimped on.
  • For cast bullets, you want to select a sizing kit to be .001" larger than groove diameter.

California Proposition 65 WARNING: This product can expose you to chemicals including lead, that are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Return to top